![](https://did-it-myself.com/wp-content/uploads/2020/07/DSCF2473-275x206.jpg)
99-04 Mustang GT Hitch Installation
I like to mountain bike. To transport my bikes, I usually use a hitch-mount rack. Initially, this was the Swagman XC2, which worked very well for the price and is in the picture below. Once I got a full suspension mountain bike, I wasn’t as comfortable with how it secures the bike via the frame. […]
![Wiring all finished](https://did-it-myself.com/wp-content/uploads/2019/03/DSCF2152-275x206.jpg)
Converting 12V Power to Turn Off in New Edge Mustang
Guide to converting 12V power to turn off on the front power outlet when the car turns off in a new edge Mustang
![This is the relay control module](https://did-it-myself.com/wp-content/uploads/2018/12/DSCF1636-275x206.jpg)
99-04 Mustang Relay Control Module Replacement
How to replace a 99-04 Mustang Relay Control module and low pressure switch to fix a Mustang AC compressor that won’t kick on
![Shiny new hub bolted on](https://did-it-myself.com/wp-content/uploads/2018/03/00000016-1-275x155.jpg)
94-04 Mustang Front Wheel Hub Replacement
Pictorial guide to 94-04 Mustang front wheel hub replacement, including replacement part numbers, tools required, and torque values
![Done](https://did-it-myself.com/wp-content/uploads/2018/02/00000052-275x155.jpg)
Changing Brakes on a 99-04 Mustang GT
Guide to changing brakes on a 99-04 Mustang GT, including references to all the parts and tools you’ll need to complete the job
![The old plugs from my car](https://did-it-myself.com/wp-content/uploads/2017/11/00000022-1-275x155.jpg)
Replacing Spark Plugs on a 99-04 Mustang
Guide to replacing spark plugs on a 99-04 Mustang, including part numbers for new plugs and list of tools required for installation
![New IACV after installation](https://did-it-myself.com/wp-content/uploads/2017/12/IMAG43741-275x155.jpg)
99-04 Mustang Idle Air Control Valve Replacement
Guide to 99-04 Mustang idle air control valve replacement, including the appropriate replacement part and torque specification
![Inside of differential](https://did-it-myself.com/wp-content/uploads/2017/11/00000010-2-275x155.jpg)
94-04 Mustang Rear Differential Oil Replacement
94-04 Mustang rear differential oil replacement including how to remove and reinstall the cover, plus links to an optional new cover with a drain plug
![The belt tensioner area](https://did-it-myself.com/wp-content/uploads/2017/09/00000001-4-275x155.jpg)
96-04 Mustang Belt Tensioner Replacement
Guide to 96-04 Mustang GT/Cobra Belt tensioner replacement, including replacing the belt, what tools are required, and what parts to use
![Reinstallation is the reverse of removal](https://did-it-myself.com/wp-content/uploads/2017/09/00000021-275x155.jpg)
99-04 Mustang Fuel Filter Replacement
Complete guide to 99-04 Mustang fuel filter replacement including links for the quick disconnect tool to use and replacement fuel filter
![Closeup of fill hole](https://did-it-myself.com/wp-content/uploads/2017/09/00000006-1-275x155.jpg)
99-04 Mustang Transmission Fluid Change
Guide to performing a 99-04 Mustang transmission fluid change, including tools required, fluid capacity, and what kind of fluid to use
![The trunk now stays open by itself](https://did-it-myself.com/wp-content/uploads/2017/09/00000013-275x155.jpg)
94-04 Mustang Trunk Lift Support Replacement
Guide to 94-04 Mustang Trunk Lift Support Replacement, including the parts to buy, to fix a trunk that won’t stay open on its own
Design Flaw – Ford 4.6 Coolant Flow and IMRCs
There is a lot of discussion and disagreement out there regarding Ford 4.6L engines and their coolant flow. Several companies out there offer a “head cooling mod” (HCM) which takes coolant flow from the driver’s side cylinder head and, rather than dead-ending it like stock, ties it into the heater supply tube with the […]
![](https://did-it-myself.com/wp-content/uploads/2014/11/IMG_1965-300x200.jpg)
Removing Exterior Sail Panels on SN95 Mustang (94-04)
Removing Exterior Sail Panels on SN95 Mustang (94-04)