![Drop In](https://did-it-myself.com/wp-content/uploads/2021/06/DSCF2897-275x206.jpg)
DW200 Miata Fuel Pump Replacement
Guide to Miata fuel pump replacement, showing replacing the stock fuel pump with a DeatschWerks DW200, also applies to Walbro 190 or 255
![Its Free](https://did-it-myself.com/wp-content/uploads/2021/06/DSCF2848-275x206.jpg)
Removing a Miata Harddog Rollbar
Guide to removing a Miata Harddog rollbar, done in this case in order to perform a fuel pump upgrade, but also useful for installation
![](https://did-it-myself.com/wp-content/uploads/2018/06/DSCF1314-275x206.jpg)
Miata Torsen Differential Swap
Guide to performing a 90-05 Miata Torsen differential swap, with pictures and parts links including how to swap housings and change bushings
![](https://did-it-myself.com/wp-content/uploads/2018/06/DSCF1402-275x206.jpg)
Rewiring Miata 6-Speed for NA
Rewiring the Miata 6-speed for an NA Miata, showing how to swap speedometer sending units and rewire the reverse light to function correctly
![Finished Car](https://did-it-myself.com/wp-content/uploads/2020/11/PXL_20201124_202740460-275x206.jpg)
K24 Miata Swap
Complete guide to a K24 Miata Swap, including step-by-step pictures swapping a k24a2 into a 1997 Miata using the KPower swap kit
![The vapor barrier](https://did-it-myself.com/wp-content/uploads/2017/09/00000010-3-275x155.jpg)
Regreasing Slow Miata Windows
A guide to regreasing slow Miata windows, including how to disassemble the door without breaking anything and where to buy lubricant and bushings
![All four pistons and rods removed](https://did-it-myself.com/wp-content/uploads/2017/07/00000047-275x155.jpg)
Disassembling a Miata Short Block
Step-by-step pictures showing disassembling a miata short block, including where every bolt goes, as well as removing the crank, pistons, and rods
![Center vents (untrimmed)](https://did-it-myself.com/wp-content/uploads/2017/05/00000028-275x155.jpg)
Installing Eclipse Vents in a Miata
Guide to installing eclipse vents in a Miata, including which model years to source, cutting the new vents down, and sanding the face
![The end link should line right up with the hole](https://did-it-myself.com/wp-content/uploads/2016/12/00000015-275x155.jpg)
Installing a Racing Beat Sway Bar and End Links
Installing a racing beat sway bar and end links into your Miata, including trimming the bushings to prevent binding and adjusting preload
![New boot is significantly shorter](https://did-it-myself.com/wp-content/uploads/2016/11/00000064-275x155.jpg)
Moog Ball Joint Boot for a Miata
Moog ball joint boot defect in their Miata K500210 problem-solver ball joints and how to fix it with an $8 set of Energy Suspension boots
![The UCAs finished](https://did-it-myself.com/wp-content/uploads/2016/11/00000123-275x155.jpg)
Miata Control Arm Bushing Replacement
Miata Control Arm Bushing Replacement without needing a press using free specialty tools from Autozone’s Loan-a-Tool program
![Adjusting ride height](https://did-it-myself.com/wp-content/uploads/2016/11/00000059-1-275x155.jpg)
Installing Coilovers in a Miata
Guide to installing coilovers in a miata, including the long bolt method, as well as how to properly torque everything down afterwards
![Replacement brake lines](https://did-it-myself.com/wp-content/uploads/2016/09/00000000-1-275x155.jpg)
Installing Miata Stainless Steel Brake Lines
Installing Miata stainless steel brake lines from 949Racing, including which line goes in which corner and what tools are required
![Replace as much fluid as possible with fresh](https://did-it-myself.com/wp-content/uploads/2016/08/00000027-275x155.jpg)
Bleeding Miata Brakes
A complete guide to bleeding Miata brakes, including materials required and a step-by-step procedure
![New pads](https://did-it-myself.com/wp-content/uploads/2016/08/00000022-275x155.jpg)
Changing Brakes in a Miata
Changing brakes in a miata, including swapping pads, rotors, and calipers, and bleeding the brakes with fresh fluid afterwards
![The hitch with the old bike rack](https://did-it-myself.com/wp-content/uploads/2016/06/00000022-275x155.jpg)
Miata Hitch Installation
Miata hitch installation using a Curt hitch from Amazon, using alternative mounting with grade 8 bolts, and discussing different hitch options
![Final picture](https://did-it-myself.com/wp-content/uploads/2016/05/00000032-1-275x155.jpg)
Miata LRB Speed Under Tray Review
A Miata LRB Speed under tray review, including how well the aluminum material and design work and how I fixed the rattle noise mine made
![Far away view of sensor](https://did-it-myself.com/wp-content/uploads/2016/05/00000007-3-275x156.jpg)
Miata O2 Sensor Replacement
Miata O2 sensor replacement guide including how to do both front and rear sensors, as well as direct vs universal fit sensors
![Installation is reverse of removal](https://did-it-myself.com/wp-content/uploads/2016/03/00000031-1-275x156.jpg)
Miata Clutch Master Slave and Line Replacement
Miata clutch master slave and line replacement, using a stainless steel braided replacement clutch line, eliminating the loops
![Held in with clips, can be pried and lifted out](https://did-it-myself.com/wp-content/uploads/2016/03/00000010-3-275x156.jpg)
Miata Window Switch Repair
Miata window switch repair writeup, detailing fixing a failed power window switch using some solder and sandpaper
![](https://did-it-myself.com/wp-content/uploads/2016/03/00000015-2-275x156.jpg)
Miata Parallel Fan Wiring
Parallel fan wiring for a Miata so that both the driver and passenger side fans turn on based on engine temperature
![Seat and belts in car](https://did-it-myself.com/wp-content/uploads/2016/03/000000301-275x156.jpg)
Installing a Racing Seat and Harness in a Miata
Installing a racing seat and harness in a Miata, using a Sparco Sprint, Racequip 5-point belts, and removable mounts without cutting the floor pan
![Removed pieces](https://did-it-myself.com/wp-content/uploads/2016/03/00000015-275x156.jpg)
Replacing a 94-97 Miata Heater Core
Replacing a 94-97 Miata heater core with either a 90-93 or a 99-00 replacement including procedures for both types of replacement core
![Done, ugly but functional](https://did-it-myself.com/wp-content/uploads/2016/02/000000142-275x156.jpg)
DIY Miata Headrest Speakers
Installing DIY miata headrest speakers using commonly available 3.5″ speakers, including wiring if the factory wiring is not present
![Dial indicator setup](https://did-it-myself.com/wp-content/uploads/2015/08/000000051-275x156.jpg)
Miata Crank End Play Measurement
How to use a dial indicator and pry bar to get a crank end play measurement on a Miata motor to determine if there is a thrust bearing issue
![97 EGR valve](https://did-it-myself.com/wp-content/uploads/2015/08/000000042-275x156.jpg)
Using a Pre-96 EGR Valve on a 96-97 Miata
Adapting a pre-96 EGR Valve to work on a 96-97 Miata, saving money since pre-96 EGR valves are easier to obtain and more widely available
![Rerouting fixes the issue entirely](https://did-it-myself.com/wp-content/uploads/2015/08/00000035-275x156.jpg)
Miata Coolant Reroute (M-Tuned)
How to install an m-tuned Miata coolant reroute with pictures including thermostat and hose part numbers, as well as how to avoid common problems
![](https://did-it-myself.com/wp-content/uploads/2015/07/000000012-275x275.jpg)
Miata Clutch, Transmission, and Rear Main Seals
How to change a Miata clutch as well as replacing all of the transmission and rear engine seals
![This is improvement, I promise](https://did-it-myself.com/wp-content/uploads/2015/07/00000004-275x156.jpg)
Miata Timing Belt Water Pump and Seals
Cleaning up a motor and replacing the timing belt, water pump, crank and cam seals, and valve cover gasket with it on a stand
![Finished](https://did-it-myself.com/wp-content/uploads/2015/05/Replacing-Miata-Wiper-Lines-00000010-275x156.jpg)
Replacing the Wiper Hoses in a Miata
Guide to replacing the wiper hoses in a miata including part numbers and pictorial instructions
![This shot is from my last engine's compression test](https://did-it-myself.com/wp-content/uploads/2015/04/IMAG0423-275x156.jpg)
Compression Testing a Mazda Miata
How to compression test a Mazda Miata; this also serves as an overview for how to generally compression test any other vehicle